Directional pattern	Omnidirectional, hemisphere
Principle of operation	Pressure
Cartridge type	Pre-polarized condenser
Frequency response	20 Hz - 20 kHz
Effective frequency range ±2 dB	20 Hz - 14 kHz, with 7 dB soft boost at 8 kHz
Sensitivity, nominal, ±3 dB at 1 kHz	20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A-weighted	Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Equivalent noise level, ITU-R BS.468-4	Typ. 35 dB (max. 38 dB)
Distortion, THD < 1%	126 dB SPL RMS, 129 dB SPL peak
Dynamic range	Typ. 106 dB
Max. SPL, THD 10%	134 dB SPL peak
Rated output impedance	From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω
Cable drive capability	Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle	Impedance balancing
Common mode rejection ratio (CMRR)	> 40 dB
Power supply (for full performance)	For wireless systems Min. 5 V - max. 10 V through DPA adapter With DAD6001-BC: P48 (Phantom Power). Will work from 12 V
Current consumption	Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector	MicroDot or XLR 3-pin
Weight	240 g (8.5 oz) excl. Cable
Microphone diameter	12 mm (0.47 in)
Microphone length	100 mm (4 in)
Cable length	3 m (10 ft)
Cable diameter	1.6 mm (0.06 in)
Polarity	Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001-BC XLR adapter)
Temperature range	-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)	Up to 90%
Colors	Black rubber disc mounted in stainless steel base