상세스펙
  • 240/1-70
Max Output Power
Number of powered channels 1
Total output power 240 W
Max output voltage 100 Vpeak
Max output current 7 Arms
Output modes
70 V 240 W
100 V (1) 120 W
16 Ω 240 W
Performance
THD 20 Hz - 20 kHz @ 1 W <0.3%
THD 1 kHz and 1 dB below clipping <0.2%
Signal to noise ratio into 16 Ω >100 dBA
Frequency response 5 Hz - 22 kHz
Input impedance 10 kΩ
Input common mode rejection (CMR) 40 dB
Gain, Sensitivity and Limiters
VPL 100 Vpeak
Sensitivity, balanced input 4 dBu / 1.23 Vrms
Sensitivity, RCA input -2 dBu / 0.62 Vrms
Input headroom for clip, balanced (2) 12 dBu / 3.09 Vrms
Input headroom for clip, RCA (2) 6 dBu / 1.55 Vrms
Connectors and Buttons
Input connectors (per channel) 3-pin detachable screw terminals, electronically balanced
Input connectors (ch. 1 & 2) Unbalanced RCA type
Output connectors (per channel) 2-pin detachable screw terminals
GPI (power control input) (3) 2 channels of voltage sense type, 4 pins in a detachable screw terminal, default for gain
GPO (power state output) (3) Contact closure type, 2 pins in a detachable screw terminal,
default for external monitoring of fault/protection/power of
RS232 Can be controlled and monitored by 3rd parties via RS232 using both the GPI pins
USB For firmware update and configuration for the matrix models
High pass filter This filter is in series with the other filters in the DSP and it is controlled with switches on the back.
Settings OFF / 50 Hz / 80 Hz
Level adjustment (per channel) (3) Front panel potentiometer, detented from -∞ to 0 dB
Matrix Model Features
Inputs processing block (4) 4 EQ sections per input
Mix-matrix routing block (4) 2 in - 1 out mix-matrix controllable from GPI
Output processing block (4) 4 EQ sections per output (presets available for many loudspeakers)
User-adjustable output look-ahead limiter ADLC (Adaptive ISO 226 compensation)
Latency from any input to any output User adjustable from 9.15 to 137 ms
Power
Nominal voltage 100 - 240 VAC
Operating voltage 85 - 265 VAC
Standby consumption <1 W
Mains connector Standard IEC receptacle
Cooling One fan, no filter required, front to rear airflow, temperature controlled speed.
Can stay off if the sustained power average stays below 12 W and the ambient temperature is below 25°C
Auto mode Power state controlled automatically with audio signal
Power consumption 70 W
Physical
Dimensions (H x W x D) 44 x 216 x 280 mm
Weight 2.0 kg
Finish Black aluminium front and black steel chasis