Directional pattern	Supercardioid, lobe-shaped
Principle of operation	Pressure gradient, with interference tube
Cartridge type	Pre-polarized condenser
Frequency response	20 Hz - 20 kHz, permanent third order high pass filter at 50 Hz
Effective frequency range, ±2 dB, at 60 cm (23.6 in)	70 Hz - 18 kHz with typ. 3 dB soft boost at 15 kHz
Sensitivity, nominal, ±2 dB at 1 kHz	19 mV/Pa; -34.4 dB re. 1 V/Pa
Equivalent noise level, A-weighted	Typ. 13 dB(A) re. 20 µPa (max. 15 dB(A))
Equivalent noise level, ITU-R BS.468-4	Typ. 24 dB (max. 26 dB)
Distortion, THD < 1%	134 dB SPL RMS, 137 dB SPL peak
Dynamic range	Typ. 124 dB
Max. SPL, THD 10%	138 dB SPL peak
Rated output impedance	100 Ω
Minimum load impedance	2
Cable drive capability	100 m (328 ft)
Output balance principle	Signal balanced
Common mode rejection ratio (CMRR)	> 40 dB
Power supply (for full performance)	P48 (Phantom Power)
Current consumption	4.5 mA
Connector	XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal - phase
Weight	68 g (2.4 oz)
Microphone diameter	19 mm (0.75 in)
Capsule diameter	19 mm (0.75 in)
Microphone length	212 mm (8.3 in)
Maximum output voltage, RMS	2.0 V
Polarity	+V at pin 2 for positive sound pressure
Temperature range	-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)	Up to 90%
Phase deviation for kit	< 10°
Colors	Matte black