Directional pattern	Omnidirectional
Principle of operation	Pressure
Cartridge type	Pre-polarized condenser
Frequency response	10 Hz - 20 kHz
Effective frequency range ±2 dB	10 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz	36 mV/Pa; -28,9 dB re. 1 V/Pa
Equivalent noise level, A-weighted	Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4	Typ. 27 dB (max. 29 dB)
Distortion, THD < 1%	133 dB SPL RMS, 136 dB SPL peak
Dynamic range	Typ. 121 dB
Max. SPL, THD 10%	146 dB SPL peak
Switchable attenuator, filters etc.	0 dB / -20 dB
Rated output impedance	200 Ω
Minimum load impedance	2
Cable drive capability	100 m (328 ft)
Output balance principle	Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)	> 60 dB
Power supply (for full performance)	P48 (Phantom Power)
Current consumption	2.8 mA
Connector	XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Weight	163 g (5.7 oz)
Microphone diameter	16 - 19 mm (0.6 - 0.75 in)
Capsule diameter	16 mm (0.6 in)
Microphone length	92 mm (3.6 in)
Maximum output voltage, RMS	8.0 V
Polarity	+V at pin 2 for positive sound pressure
Temperature range	-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)	Up to 90%
Matching tolerance (frequency response and sensitivity)	±0.5 dB
Phase deviation for kit	< 5°
Colors	Matte black

Directional pattern	Omnidirectional
Principle of operation	Pressure
Cartridge type	Pre-polarized condenser
Frequency response	10 Hz - 20 kHz
Effective frequency range ±2 dB	10 Hz - 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz	36 mV/Pa; -28,9 dB re. 1 V/Pa
Equivalent noise level, A-weighted	Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level, ITU-R BS.468-4	Typ. 27 dB (max. 29 dB)
Distortion, THD < 1%	128 dB SPL RMS, 131 dB SPL peak
Dynamic range	Typ. 116 dB
Max. SPL, THD 10%	139 dB SPL peak
Rated output impedance	100 Ω
Minimum load impedance	2
Cable drive capability	100 m (328 ft)
Output balance principle	Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)	> 50 dB
Power supply (for full performance)	P48 (Phantom Power)
Current consumption	2.8 mA
Connector	XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Weight	63 g (2.2 oz)
Microphone diameter	16 - 19 mm (0.6 - 0.75 in)
Capsule diameter	16 mm (0.6 in)
Microphone length	64 mm (2.5 in)
Maximum output voltage, RMS	4.5 V
Polarity	+V at pin 2 for positive sound pressure
Temperature range	-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)	Up to 90%
Matching tolerance (frequency response and sensitivity)	±0.5 dB
Phase deviation for kit	< 5°