Number of channels	10
Type	Analogue, electronically balanced Euroblock connectors
Impedance	10 kΩ
Maximum input level	+24 dBu
Gain range	0 to +66 dB with step 6 dB
Common mode rejection	Typically, 60 dB at 1 kHz
Crosstalk (inter-channel @ 1 kHZ)	< -75 dB
Phantom power	+48 VDC, 7mA per channel

Number of channels	6
Type	Analogue, electronically balanced Euroblock connectors
Output impedance	200 Ω, balanced
Maximum output level	-31 dBu to +24 dBu

Number of channels	64 input / 64 output
Connector	2 x RJ45
Sample rate	48 kHz
Resolution	24-bit
DM8500 internal latency	< 1.8 ms
DM8500 Dante latency	0.25 ms, 0.5 ms, 1.0 ms, or 5.0 ms (set by Dante controller)
Clock synchronization	Incoming Dante clock or DM8500 internal clock

Number of channels	16 out
Connector	RJ45
Sampling rate	48 kHz
Latency	< 1.8 ms
Cable	Shielded CAT-5
Cable length	Up to 75 m / 250 ft

Number of channels	2 in / 2 out
Resolution	16-bit
Sampling rate	48 kHz
Type	Audio Class 1.0 compliant
Connector	USB, type B

Number of channels	6
Input voltage	0 to 5 V
Input impedance	4.7 kΩ to +5 V (2-wire mode) > 1 MΩ (3-wire mode)
Output voltage	0 / 5 V (unloaded)
Output impedance	550 Ω (source) 10 Ω (sink)
Output current	-1 mA (source) (Vo ≥4 V) 20 mA (sink), (Vo ≤ 0.4 V)
+5 V supply current	150 mA max

Frequency response	20 Hz to 20 kHz (±1 dB, input to output @ +4 dBu)
THD+N (1kHz @ 0 dB gain, +4 dBu output)	< 0.005% (Bandwidth = 20 Hz-20 KHz)
Equivalent input noise	-125 dBu (Bandwidth= 20 Hz-20 KHz, gain = 66 dB, RS = 150 Ω)
Dynamic range	> 105 dB (Bandwidth = 20 Hz-20 KHz, none weighted)
A/D - D/A conversion	multi-bit ΣΔ
AEC Module	Support 6 AEC Modules (Up to 24 channels totally) Each AEC module tail length setting options : 150ms with 4 channels or 300ms with 2 channels Each AEC Module can set individually
AEC convergence	up to 100 dB/sec

Voltage	100 VAC to 240 VAC ±10 %
Frequency	50 ~ 60 Hz
Consumption	< 48 W

Dimensions (H x W x D)	44 x 483 x 293 mm
Weight	Net : 3.6 kg Shipping : 4.8 kg