Directional pattern	Cardioid
Principle of operation	Pressure Gradient
Cartridge type	Pre-polarized condenser
Frequency range, ± 2 dB	4080: 250 Hz – 17 kHz with typ. 4 dB soft boost at 4 - 6 kHz (-5 dB at 100 Hz)
Sensitivity, nominal, ± 3 dB at 1 kHz	SC4060, SCO60-H, 4080: 20 mV/Pa; -34 dB re. 1 V/Pa SC4061/63/71, SCO61-H/71-H: 6 mV/Pa; -44.5 dB re. 1V/Pa SC4062: 1 mV/Pa; -60 dB re. 1V/Pa
Equivalent noise level, A-weighted	SC4060, SCO60-H, 4080: Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A)) SC4061/63/71, SCO61-H/71-H: Typ. 26 dB(A) re. 20 μPa (max. 28 dB(A)) SC4062: Typ. 33 dB(A) re. 20 μPa (max. 37 dB(A))
S/N ratio (A-weighted) re. 1 kHz at 1 Pa (94 dB SPL)	SC4060, SCO60-H, 4080: 71 dB SC4061/63/71, SCO61-H/71-H: 68 dB SC4062: 61 dB
Total Harmonic Distortion (THD)	<1% THD up to 123 dB SPL peak <1% THD up to 120 dB SPL RMS sine
Dynamic Range	SC4060, SCO60-H, 4080: Typ. 100 dB SC4061/63/71, SCO61-H/71-H: Typ. 97 dB SC4062: Typ. 90 dB
Max. SPL peak before clipping	SC4060, SCO60-H, 4080: 134 dB SC4061/71, SCO61-H/71-H: 144 dB SC4062: 154 dB SC4063: 138 dB
Output impedance	30 – 40 Ω, depending on current draw
Cable drive capability	300 m (984 ft) with DAD6001-BC/DAD6024/DAD4099 XLR phantom power adapter
Power supply	With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance. For wireless systems: Min. 5 V through DPA adapter (SC4063 min. 3 V).
Polarity	Positively increasing sound pressure produces positive going voltage on MicroDot pin.
Connector	MicroDot, adapters are available
Weight incl. cable and MicroDot connector	SC4060/61/62/63: 7.5 g (0.26 oz) SC4071: 9 g (0.32 oz) 4080: 15 g (0.53 oz) SCO60-H/61-H: 13 g (0.46 oz) SCO71-H: 14 g (0.49 oz)
Cable length	1.8 m (5.9 ft) (4080: 1.2 m (4 ft))
Cable diameter	SC4060/61/62/63/71, 4080: 1,6 mm (0.06 in) SCO60-H/61-H/71-H: 2,2 mm (0.09 in)
Temperature range	-40 °C to 45 °C
Relative Humidity (RH)	Up to 90%