상세스펙
  • RF Explorer®Pro
Spectrum Analyzer Specifications
Frequency range 15MHz to 3.3GHz (baseline)
15MHz to 6.1GHz (requires license 6G)
15MHz to 7.5GHz (requires license 7G)
Frequency Span 0 (zero span)
500kHz to 6GHz (sweep)
RBW 3kHz – 2.5MHz
VBW Automatic
Low Frequency Support 100kHz – 240MHz
with external RF Explorer Upconverter module (not included)
Frequency resolution 1kHz
Sweep Time 3GHz / 280ms
With RBW 2.5MHz
Sweep Points 512-50,000
Frequency stability (typical) TCXO ±0.5ppm
Amplitude stability and accuracy (typical) ±1.5dB
Factory Calibration 3K reference points
Frequency accuracy (Internal reference) TCXO ±1ppm
Aging ±1ppm/year
Displayed Frequency accuracy Span/(Sweep Points-1)
Amplitude resolution 0.5dB
Future firmware upgrade
will enable 0.25dB
Dynamic range (Depending on RBW and Band) Direct: -110dBm to +10dBm
Preamplifier LNA: -130dBm to -30dBm
Attenuator: -80dBm to +33dBm
Absolute Max input power +33dBm internal Attenuator selected
Display Average Noise Level -130dBm typical LNA
Noise Floor -160dBm/Hz
typical LNA
WiFi Analyzer 2.4Ghz / 5.8GHz / 6GHz / 7GHz
GPS capture Requires 5V active antenna (not included)
GPS Heatmap Captures in sync with Sweep data
Requires Heatmap License Evaluation mode for 10 usages included
CPU Advanced Low Power Intel 64bits
DSP High Performance Dual DSP 32bits+16bits
Save/Replay 100MB Sweeps on Memory
Unlimited Sweeps on Files
File Export Compatible CSV and Binary formats
Suitable for WSM/WWB6/Excel/Matlab
Wideband Power Meter Specification
Frequency range 10MHz to 8GHz
Dynamic range
(Depending on RBW and Band)
Direct: -60dBm to +10dBm
Preamplifier LNA: -130dBm to -30dBm
Attenuator: -80dBm to -10dBm
Operational Modes Continuous
Trigger
Event Detection 100uS
Samples 2-1024 Trigger Samples
100,000 Captures on Memory
Amplitude resolution 0.25dB
Amplitude stability and accuracy (typical) ±1.5dB
Factory Calibration 1K reference points
Signal Tracking Generator Specification
Frequency range 24MHz to 6GHz
shared license with spectrum analyzer mode
Frequency step/resolution 1kHz
Frequency stability (typical) TCXO ±0.5ppm
Output power accuracy Typical ±3dB
Output power stability Typical ±0.5dB
Output amplitude settling time 500uS
Factory Calibration 1K reference points
Frequency accuracy (internal reference) TCXO ±1ppm
Output power range (nominal) -40dBm to -30dBm in 3dB steps
-10dBm to 0dBm in 3dB steps
Operational Modes CW
Tracking SNA
Frequency Sweep (future firmware)
Amplitude Sweep (future firmware)
Harmonics Typical < -10dBc
Spurious Typical < -50dBc
Frequency Sweep settling < 5ms
Amplitude Sweep settling < 500uS
Sweep hops range unlimited
Tracking Speed >500pts/sec
Electrical and Mechanical Specification
Remote Display Standard multiplatform VNC Compatible
Video Output Micro HDMI port
USB Type A USB 3.0
Network Ethernet with USB adapter
Adapter Not Included
Remote Control VNC multiplatform free viewer
Audio Internal Speaker
Audio Jack 3.5mm
Micro SD card Up to 64GB
SD Card Not Included
Operating temperature 5-35C
Operating humidity Max 90%
RF Connector type SMA 50 ohms
Display Technology Anti-glare 8” IPS TFT
Capacitive Touchscreen
Display Resolution 1280x800 pixels
16.7M color
Display Luminance 250 cd/m2
Display Contrast ratio 800:1
Viewing Angle 85 deg
Weight 570 g
Size 215x140x25mm
Charge USB-C 5VDC 2A
Charger Not Included
Charge Time Typical 3hs
Internal Battery Lithium Ion 4500mAh
Battery Lifetime 3.5 – 5hs
Depending on operational mode
Holder Back Removable Holder
Tripod Support Compatible with standard
1/4-20 Camera tripod
Certification CE/FCC/RoHS/MSDS
Included Antennas UHF: 400MHz-900MHz (gray)
Wideband: 900MHz-6GHz (black)
Included Cable USB-C 2A rated cable, 1m length