Number of powered channels	2
Total output power	240 W
Max output voltage per channel (1)	43.8 Vpeak
Max output current per channel	7.8 Arms
Output per channel
2 Ω	120 W
4 Ω	120 W
8 Ω	120 W
16 Ω	60 W

THD 20 Hz - 20 kHz @ 1 W into 8 Ω	<0.3%
THD 1 kHz and 1 dB below clipping	<0.2%
Signal to noise ratio into 8 Ω	>101 dBA
Channel separation (crosstalk) @ 1 kHz	>60 dBA
Frequency response	5 Hz - 22 kHz
Input impedance	10 kΩ
Input common mode rejection (CMR)	40 dB

VPL for 16 Ω mode	43.8 Vpeak
VPL for 8 Ω mode	43.8 Vpeak
VPL for 4 Ω mod	31 Vpeak
VPL for 2 Ω mode	22 Vpeak
Sensitivity, balanced input	4 dBu / 1.23 Vrms
Sensitivity, RCA input	-2 dBu / 0.62 Vrms
Input headroom for clip, balanced (2)	12 dBu / 3.09 Vrms
Input headroom for clip, RCA (2)	6 dBu / 1.55 Vrms

Input connectors (per channel)	3-pin detachable screw terminals, electronically balanced
Input connectors (ch. 1 & 2)	Unbalanced RCA type
Output connectors (per channel)	2-pin detachable screw terminals
Line-level output connectors (ch. 3 & 4)	3-pin detachable screw terminals, electronically balanced
GPI (power control input) (3)	2 channels of voltage sense type, 4 pins in a detachable screw terminal, default for gain
GPO (power state output) (3)	Contact closure type, 2 pins in a detachable screw terminal, default for external monitoring of fault/protection/power of
RS232	Can be controlled and monitored by 3rd parties via RS232 using both the GPI pins
USB	For firmware update and configuration for the matrix models
Level adjustment (per channel) (3)	Front panel potentiometer, detented from -∞ to 0 dB

Inputs processing block (4)	4 EQ sections per input
Mix-matrix routing block (4)	4-in / 4-out mix-matrix controllable from GPI
Output processing block (4)	4 EQ sections per output (presets available for many loudspeakers) User-adjustable output look-ahead limiter ADLC (Adaptive ISO 226 compensation)
Two line-level outputs (5)	Each capable of driving 6 LUCIA units in parallel
Latency from any input to any output	User adjustable from 9.15 to 137 ms

Nominal voltage	100 - 240 VAC
Operating voltage	85 - 265 VAC
Standby consumption	<1 W
Mains connector	Standard IEC receptacle
Cooling	One fan, no filter required, front-to-rear air flow, temperature controlled speed, can stay off if the sustained power average stays below 2 x 6 W and the surrounding temperature is below 25°C
Auto mode	Power state controlled automatically with audio signal
Power consumption	70 W

Dimensions (H x W x D)	44 x 216 x 280 mm
Weight	2.0 kg
Weight	Black aluminium front and black steel chasis