Amplifier Class	D
Output Power (EIAJ 8:32 all channels driven)	4 x 4000 W @ 2.7 ohm 4 x 2600 W @ 4 ohm 4 x 1400 W @ 8 ohm
Frequency Response (-3dB)	20 Hz - 23000 Hz
SNR Analog inputs (unweighted)	>111 dB
SNR Digital inputs (unweighted)	>115 dB
Crosstalk	<70 dB
Distortion (THD+N) (20 Hz - 20000 Hz,1000 W @ 4 ohm)	<0.2 %
Gain (linear mode @ 0 dB)	32 dB
Damping factor (@ 4 ohm, 20 Hz - 1500 Hz)	>95
Max burst length (@ 50 Hz, CF = 7 dB, 4 ohm, 1% THD+N)	200 ms

Total number of inputs	8
Line inputs	4
Digital inputs	4
General Purpose Inputs (GPI)	2
Programmable GPI	Yes
Photo-coupled GPI	2

Signal output number	4
General Purpose Outputs (GPO)	3
Programmable GPO	Yes

DSP	Yes
EQ Filters	Yes
Advanced algorithms	FiRPHASE technology \| BASS shaper \| air compensation \| mid-low correction \| driver excursion control \| dynamic PEQ \| multi-band compressor \| pilot tone detection \| backup recovery strategy \| impedance load measurement
Compressors	Yes
Delay	Yes
Tone controls	Yes
High-pass filter	10 Hz - 1000 Hz
Crossover	2500 - 3500 Hz
Automatic Gain Control (ACG)	Yes

Cooling	Forced
Short circuit	Yes
Thermal	Yes
DC	Yes
Fuses	Yes
VHF (Very High Frequencies)	Yes

Temperature range - Continuous operation	-5°C - +40°C / +23°F - +104°F
Temperature range - Reduced output power	-5°C to +50°C / +23°F to +122°F
Fan noise idle	<35 dBA
Fan noise max	<64 dBA

Operating voltage	90-240 V~ 50/60Hz
Nominal current AC @ 100-120 V	30 A
Nominal current AC @ 220-240 V	16 A
Stand by power consumption	20 W
Idle power consumption	90 W
Power consumption	5800 W
Main fuse	Internal

Cabinet/Case Material	Metal
Handles	2 metal handles for rack mount
Color	Black - RAL 9005
Rack mounting	19", 2U

Height	88.7 mm
Width	482 mm
Depth	482.4 mm
Weight	15 kg