Frequency ranges	470 - 1260 MHz (full range)
Filter selection	10 automatically selected band-pass filters: 470-608 MHz 470-694 MHz 470-832 MHz 470-1260 MHz 510-608 MHz 510-694 MHz 510-832 MHz 510-1260 MHz 822-1260 MHz 940-1260 MHz
Antenna connector	4 x BNC type female connectors for inputs, 2 x SMA type female connectors for loop
Antenna input impedance	50 Ohm
Spurious emissions	< 2 nW
Input/output gain	1dB ± 1
Input/cascade gain	1dB ± 1
IP3	14 dBm
Antenna booster powering	+12 Vcc / 300 mA MAX

Analogue audio output	2 x DB25 connectors (TASCAM)
Digital audio output	AES59 (DB25 connector) and AES72 1M (2 RJ45 connectors)
Dante output	Dante Primary and Secondary (2 x 1000 Base TX RJ45 Ethernet)
Monitor output	headphone 6.3 mm jack socket, volume adjustable with a front knob

LED	4 LEDs indication for the zone activation status (red, green, off) 4 LEDs indication for the booster status (red, green, off) 4 LEDs indication for the power supply status (red, green, blue, off) 1 LED indication for the MRK16 status (green, off)
Max number of receiver slots	4
Max number of channels	16 (with MCR54), 8 (with MCR54-DUAL)
Managing interface	2 x 1000 Base TX RJ45 Ethernet, Remote Control Interface, USB-C with powering 3A@5V (optional) and thru display menu of the 1st receiver on the right
Powering	10÷ 28 Vdc, 5A max, redundant DC Vdc1 and Vdc2 on XLR M-4pin PE1 option: Power Over Ethernet board : - dual POE++ input on eth 2/4 (redundant pwr supply) - POE output on eth 1 (external Wifi, Bluetooth antenna)
Power consumption	60W with 4 MCR54s and 4 active boosters
Power supply output	on USB-C port to connect external device (e.g. tablet) 1.5 A max (optional)
Temperature range	-10 ÷ +55 °C
Dimensions	44 x 483 x 352 mm (HxWxD)
Weight	4.3 Kg. with 4 MCR54s and EXP2 board, 3.30 Kg. without MCR54s